Door and Gate Systems with Pull-In Protection
MS-4 Gate Controller with Reversing Contactor
The controller MS-4 is conceived for the automatic action of gate systems with closing edge- and enter protection evaluation. It offers connection possibilities like automatic closing with one-way or two-way control. All running parameters are adjusted in the input menu through plaintext. In case of failure or while mounting works, the drive can be controlled in the hold-to-run mode via the tact switches (UP/DOWN).
- Runtime monitoring
- Connections pull-in protection tested
- Traffic light controlling one-way, two-way
- Connection safety edge 8K2 or optical sensors
- Connection light barrier
- automatic time closing
V2NT for tubular Motors
Gate controller for 1-Phase Engine 230 V AC.
The control system V7T was conceived for gate systems with alternating current tubular motors and with closing edge- and enter protection evaluation. It offers connection possibilities like automatic closing with one-way or two-way control. All running parameters are adjusted in the input menu through plaintext. In case of failure or while mounting works, the gate can be controlled in manual mode while activated keyswitch.
- Membrane keys
- Runtime monitoring
- Connections pull-in tested
- Traffic light control one-way, two-way
- Connection safety edge 8K2 or optical sensors
- Connection light barrier
- Automatic time closure