Reflecting Optical Gates
Retro-reflective Light Gate PZR 31-SET
Retro-reflective Light Gate with polarising filter, including reflector and 2m hard-wired cable.
Retro-reflective Light Gate PZR-20
Important!
The circuit board has a flexible mounting. First all three screws need to be loosened by one turn (maximum length of screws is three turns). After adjustment, screws can be tightened.
Additional information!
Cable entry is pre-punched and can be opened manually. The rubber sleeve or the fixed cable mount can be used (both are included).
The case can also, depending on the mounting mode, be adjusted with three screws.
|
|
|
|
| Isolator RD-20 for the reflector |
Mounting bracket HW-R20 for the reflector |
Mounting bracket HW-PZ for the retro-reflective switch |
|
reflector with |
 |
- Retro-reflective Light Gate with polarising filter
- range 0.5m - 15m depending on reflectory type
- low sensitivity to stray light
- high safety class
- optimised cable connection
- joint room
- polarising optics
- test input pins
- reverse voltage protection
- realy output
- optics adjustable
- dirt alert
- optical adjustment via LED
Retro-reflective Light Gate RLK 29-55/59/116-Set
including reflector
and mounting bracket
AC/DC Power
Retro-reflective Light Gate WL280-S230
Polarising filter
Red light
Squeeze-type cable connection or hard-wired cable
Includes reflector P 250 an mounting hardware
CE-interference emission EN 61000-6-3 (fresidential and industrial)
| Reflektor P 250 | Connections |
|
5 x 0,76 mm² Wedges |
|
|
|
|
| Dimensions | Adjusting options |
  |
|
Reflectors:
|
100x100 mm |
125x56 mm |
|
84 mm |
61 x 51 mm |
Weather protector for reflectors R84 and square 50 x 60
- environmental protection
- isolated the reflector from steel and reinforced steel
- prevents fogging